Plugfree installation and configuration manual

Modified on Tue, 15 Apr at 11:39 AM

In this guide you will learn how to install Plugfree on your Morek charger.

#1 Charger integration

Requirements

Before you begin, ensure you have the following:

Configuration access to the charger via Morek EV Tool
Network connectivity for the charger.

If not please refer to our Smart Charger Configuration guide

Integration Steps

1. Access the Charger with the Morek EV Tool

How to do this you can learn in our Smart Charger Configuration guide

2. Locate the OCPP Settings

Navigate to the section where you can configure OCPP settings.

3. Configure the OCPP Server URL

Set the OCPP server URL to ws://app.ruex.eu:8108

4. Make sure that charger is in app mode.

Charge mode: APP

5. Save and Apply the Settings

Save the changes and apply the new settings. This step may involve restarting the charger to apply the new configuration.

6. Verify the connection

Once the configuration is applied, add the charger to Plugfree following instructions in the next section. If the integration fails, please refer to the troubleshooting section.

#2 Connecting the charge point to your Plugfree account

Now you need to add and connect your charge point to your Plugfree account.
You can do this through Plugfree App.

1. Download the Plugfree iOS or Android app on your phone

2. Create an Account and Log In.

3. Select the "My Stations" button in the menu below. Proceed according to the received instructions.

Note: Usually, the charger will connect to the Plugfree straight away. However, in some cases, depending on configuration, it might take up to 1 hour to connect to Plugfree.

Need to talk to a specialist?
Contact our support team