TABLE OF CONTENTS
- 1. Prerequisites
- 2. Account registration
- 3. Adding a charger
- 4. Interface and usage.
- 5. Personal Settings
- 6. Charge Settings
- 7. Settings
1. Prerequisites
You can download the Morek EV APP from Google and Apple here:
Make sure the charger is turned on.
If the charger is new, you can continue with Account Registration. If the charger has already been set up via the Morek EV Tool APP (Google Play / App Store). It will be necessary to use the tool again to change settings:
Server URL: wss://ocpp.morek.eu:8888 (or ws://ocpp.morek.eu:8887)
CP Name: "SN number of the charger"
Charger Mode is set to "APP"
2. Account Registration
When you open the Morek EV APP for the first time, you have to register an account with Morek. For this, you will need a working email address. This is used to bind the charger to the account, as well as used to send charging sessions summary in case of export (more on that later).
If you already have an account, you can just log in and continue.
Otherwise, push the "Sign up" button on the login screen:
Fill out a valid email address and your password.
Next, click the "Send" button. This will send a Code to your email for verification.
Enter the code into the "*Verification Code" field, and after reading and agreeing to the User Agreement and Privacy Policy. Push the "Sign up" button.
Now your Morek Account is created, and you can use it to log into the APP.
3. Adding a charger
When you log in to the APP for the first time, you can bind a charger to your account (This is also possible with the "Add Charger" button in the Personal settings menu later on).
Fill out the charger's SN number and PIN (default is 12345). Optionally, you can also give the charger a friendly name:
After this, you are asked to set up the charger via BT connection. Click on the "Go to Bluetooth Settings" button to set up the charger. (For this step, you need to be close to the charger)
The APP should connect to the charger. Detailed information about all the settings can be found in our Smart Charger Configuration guide, as they are similar to the Morek Tool APP.
For the Morek APP to work correctly, you need to set up an internet connection if it's via Wifi or 4G fill out the necessary information or connect to your desired Wifi:
Also, make sure that the 'Server URL' is set to 'MOREK WSS' (or 'MOREK WS') and 'Charger Mode' is set to APP.
After setting up the charger, click the back button on the top left. The charger will reboot.
When the charger reboots with the correct setting, you should be greeted with a ready state in the APPS Main Interface:
4. Interface and usage.
From the Main Interface, you can access several functions and settings of the APP.
- You can see the charger's availability as well as Start/Stop the charging process:
- You can monitor Total Energy consumption, Power consumption, Elapsed time and Cost of the current charging session.
All these informations are refreshed every 60 seconds.
By pushing the cog next to "Cost", you can manually set up a price, and the APP will calculate the cost of charging per session.
By pushing the cog next to "Power", you can check the Voltage and Current
- In case you have more chargers, you can select which one to operate by pushing the charger's name button and selecting the charger's name:
- You can check information via the
button located next to the charger's name:
- The
button allows you to view charging sessions. With the Export button located in the upper right corner, an email will be sent to you with a link to download this information in .csv format.
- The
button will unlock the socket of the charger on Socket versions and Socket with Shutter versions.
- You can set up scheduled charging by pushing the onscreen button or in the "Charge Settings" menu.
After setting up your schedule and current limit, push the "Enable" switch and then "Save" in the upper right corner. The setting will also still be visible from the main screen:
- For Solar charging. An advanced setup is necessary for the Solar functionality to work properly (Solar System Configuration Manual). When all is set up correctly, you can set how much current is allowed to be taken from the grid:
5. Personal Settings
By pushing the Personal button on the main screen, you can see your username, all chargers bound to this account and log out of the APP.
- You can change your profile picture by clicking on the
- Opens the same menu as in section #3, Adding a charger.
- Allows you to add users registered with Morek, to control your selected charger via their account
- Here you can manage your RFID cards.
- Allows you to change your password as well as add additional information about yourself.
- Allows you to check the version of the APP, send us feedback, read the User agreement and Privacy policy, as well as Delete your account:
6. Charge settings
Located on the right side of the main interface window:
Here you can set up Schedule charging (same as in section #4), Off-peak charging and Charge Authorization (turning Athorization off makes the charger function as a plug and go).
7. Settings
Located in the upper right corner:
- Allows you to change the Chargers' name:
- Lets you access the charger via BT connection and lets you set up similar settings as in the Morek Tool, seen in the Smart Charger Configuration guide
- You can turn on DLB mode (A mode to use with CT-Hub for group load management). An advanced setup is necessary for this feature to work.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article