DC Charger NEW User Interface Charging manual

Modified on Mon, 5 May at 12:17 PM

Depending on the charging method used the operation of charging slightly difers

 


1. Platform charging

 

 

When the charging connector is in the Preparing state,click the connector and the following interface will appear:

 

Swipe the card to start charging, and the program will enter the charging process, as shown below: 


Click the charging button on the left, swipe the card again, and the charging is completed. The interface is as shown below:

 

 


2. Local card charging


When the charging connector is in the Preparing state,click the connector and the following interface will appear:

 

Swipe the card to start charging, and the program will enter the charging process, as shown below:

  

Click the charging button on the left, swipe the card again, and the charging is completed. The interface is as shown below:

 

 


3. Button charging

When the charging connector is in the Preparing state,click the connector and the following interface will appear:

 

Click the Start Charging button to start charging. After starting, the program enters the charging process. The interface is as follows:


Click the connector on the left, the interface is as follows:


Click the Stop Charging button, and the charging is completed. The interface is as follows:

 

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article